INCH POUND
MIL-DTL-3372G
4 February, 2000
SUPERSEDING
MIL-C-3372F
12 December 1990
DETAILED SPECIFICATION
CASE, TENTAGE REPAIR KIT
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers one type and size tentage repair kit case made of cotton
duck and webbing.
2. APPLICABLE DOCUMENTS
* 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issue of these documents are those listed in the issue of the Department of Defense
Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation
(see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: Defense Supply Center
Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-CNR, 700 Robbins Avenue,
Building 6D, Philadelphia, PA 19111-5094, by using the Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 8340
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business