MIL-DTL-82288C
*2.3 Order of precedence. In the event of a conflict between the text of this specification and
the references cited herein, the text of this specification takes precedence. Nothing in this
specification, however, supersedes applicable laws and regulations unless a specific exemption
has been obtained.
3. REQUIREMENTS
*3.1 First article. When specified, (see 6.2), a sample shall be subjected to first article
inspection (see 4.2 and 6.2).
*3.2 Materials and components. Materials and components shall be as specified herein and in
referenced documents and drawings. Materials not definitely specified shall be of the quality
normally used by the manufacturer provided the complete item complies with all provisions of
this document. It is encouraged that recycled material be used when practical as long as it meets
the requirements of this document.
*3.2.1 Base fabric. The base fabric for the Type I Tarpaulin shall conform to Type I, Class 1, 2
or 3, form 1 or Type II, Class 2, Form 1 as specified (see 6.2) of A-A-55308. The base fabric for
the Type II Tarpaulin shall conform to Type II, Class 2, Form 1 of A-A-55308. The smooth side
of the fabric shall be the face of the finished tarpaulin.
3.2.2 Color. The color or color combinations for the Type I and Type II tarpaulins shall be as
specified (see 6.2) and shall conform to FED-STD-595.
*3.2.3 Grommets. The grommets shall be in accordance with NASM16491.
3.2.4 Thread, polyester. The thread used for all stitching shall conform to Type I, Class 1, sub-
class B, size FF of V-T-285. The thread may be colored or natural. When colored thread is
used, the thread shall approximately match the color specified for the base fabric. Requirements
for colorfastness shall not apply.
3.2.5 Adhesive. Adhesive used to cement the seams and hems shall be of a type compatible
with the coated fabric and shall be capable of producing seams to meet the requirements of
3.4.2.3. All cemented areas shall be thoroughly dried and talced if necessary.
3.3 Design.
3.3.1 Type I Tarpaulin. The size of the Type I tarpaulin shall be as specified in 1.2. It shall be
fabricated from lengths of the specified base fabric, joined by heat-sealed seams along their
lengthwise edges and be furnished with a plain edge and without grommets.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business