MIL-DTL-43002E
SPECIFICATIONS
FEDERAL
A-A-55280
- Cloth, Coated, Glass, Silicone Rubber
(Unless otherwise indicated. copies of federal and military specifications, standards, and
handbooks are available from the Document Automation and Production Service, (DAPS) Bldg.
4D (DPM-DODSSP), 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other
Government documents, drawings, and publications form a part of this document to the extent
specified herein. Unless otherwise specified, the issues are those cited in the solicitation.
DRAWING
U.S. ARMY BIOLOGICAL & CHEMICAL COMMAND
8-1-10
- Shield, Stovepipe, Tent, Nonmetallic; Assembly and Details
(Copies of drawings are available from the U. S. Army Biological Chemical Command,
ATTN: AMSSB-REO-S(N), NATICK, MA 01760-5017.)
*2.3 Non-Government publications. The following document(s) form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of the documents
which are DoD adopted are those listed in the issue of the DODISS cited in the solicitation.
Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the
documents cited in the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM-D-412
- Tensile Strength
ASTM-D-573
- Air Heat Test, Air Heating Medium
ASTM-D-1053
- Stiffness, Torsional, Low-Temperature
ASTM-D-2240
- Hardness Durometer
ASTM-D-2256
- Tensile Properties of Yarns by the Single-Strand Method
(Applications for copies of referenced documents should be addressed to the American
Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19426-
2959.)
*2.3 Order of precedence. In the event of a conflict between the text of this specification
and the references cited herein, the text of this specification takes precedence. Nothing in this
specification, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
*3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection (see 4.3 and 6.2).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business