MIL-DTL-44427A
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the issue of the Department of Defense
Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation
(see 6.2).
SPECIFICATIONS
MILITARY
MIL-F-44425
- Frame Section, Tent, Soldier Crew
(Unless otherwise indicated. copies of federal and military specifications, standards, and
handbooks are available from the Document Automation and Production Service, Bldg. 4D
(DPM-DODSSP), 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
*2.2.2 Other Government documents, drawings, and publications. The following other
Government documents, drawings, and publications form a part of this document to the extent
specified herein. Unless otherwise specified, the issues are those cited in the solicitation.
DRAWINGS
U.S. ARMY SOLDIER BIOLOGICAL CHEMICAL COMMAND, NATICK SOLDIER
CENTER
5-4-7581
- Soldier Crew Tent Assembly
5-4-7676
- Instruction Label, Soldier Crew Tent
5-4-7678
- FSCT Pegs, Bag & Contents
(Copies of drawings are available from the U. S. Army Biological Chemical Command,
ATTN: AMSSB-REO-S(N), NATICK, MA 01760-5017.)
*2.3 Order of precedence. In the event of a conflict between the text of this specification
and the references cited herein, the text of this specification takes precedence. Nothing in this
specification, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
*3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection (see 4.2 and 6.4).
3.2 Materials and components. Materials and components shall be as specified on the
applicable drawings.
3.3 Construction. Construction shall conform to the drawings listed in section 2 and as
specified herein.
3.3.1 Type 301 stitching. Ends of all type 301 stitching shall be backstitched or
overstitched not less than ½ inch in accordance with the required stitch pattern.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business