MIL-DTL-1716J
TABLE III. Visual defects cont'd.
Classification
Examine
Defect
Major Minor
212
Burr or rough or sharp edge
Construction
Soldered joint of nib filler (when applicable) to lock
and
workmanship
body is incomplete, unsound, not smooth, not free from
(cont'd)
pin holes or flux residue
213
Extension and
Pole cannot be extended or collapsed, e.g., tubular
collapsibility
section binds prohibiting free manipulation of tubular
sections
106
Pole comes apart
107
Pole cannot be locked at each specified length
214
Identification
Missing, wrong location, wrong size, incomplete,
marking
illegible, incorrect, or not accomplished as specified
215
4.3.3.2 Dimensional examination . Examination shall be made of the poles for defects in
dimension. Any dimension not within specified requirements shall be classified as a defect.
4.4 Methods of inspection.
4.4.1 Hardness test. The Rockwell hardness of the body of the locks shall be tested in
accordance with ASTM E 18. Any body of the locks having a Rockwell hardness of less than
C40 or more than C45 shall be classified as defective.
5. Packaging
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of material is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are maintained by the Inventory
Control Point's packaging activity within the Military Department or Defense Agency, or
within the Military Department's System Command. Packaging data retrieval is available
from the managing Military Department's or Defense Agency's automated packaging files,
CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which may be
helpful, but is not mandatory).
6.1 Intended use. The adjustable, telescopic, magnesium, tent pole is intended to be used
with the arctic ten-man tent and the hexagonal lightweight tent.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business