MIL-DTL-43492D
TABLE I. Defects
Classification
Examine
Defect
Major
Minor
Cloth
Cut, tear, or hole (including exposed drill hole)
A
B
greater than 1/8 inch in length or diameter:
- on tent section
101
- on cover or sod cloth
201
Cut, tear or hole (including exposed drill hole)
1/8 inch or less in length or diameter:
- more than 20 holes:
- on tent section
102
- on cover or sod cloth
202
- more than 10 but not more than 20 holes:
- on tent section
203
- on cover or sod cloth
301
- more than 5 but not more than 10 holes:
- on tent section
302
Untreated area on either side of cloth more than
1 inch in length or diameter
204
Broken or missing yarn; multiple floats clearly
visible at normal inspection distance, (approx 3 feet)
205
Screening
Cut or tear:
- more than 2 inches in length
103
- ¼ inch or less in length
303
- more than ¼ inch in length but not more
than 2 inches in length
206
Webbing,
Edge frayed or scalloped
304
tie tapes
Cut or tear
305
Tape omitted:
- one
306
- two or more
207
Hardware
Broken
104
Malformed:
- fails to perform intended function
105
- but will perform intended function
208
Corroded area
307
Burr or sharp edge that may cause injury in
handling or damage to fabric
106
Not specified type or size
209
Grommets
Improperly set, two or more teeth exposed
(except where a grommet is set as specified
but is in an area of uneven thickness which
prevents uniform clinching)
308
Clinched loosely, allowing grommet to
rotate around hole
309
Clinched excessively tight (i.e., cutting cloth)
107
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business