A-A-109 - Tent, Wall Type
A-A-55235 - Tarpaulin; Cotton Duck, 20 Feet By 20 Inches
This document covers a 20 foot by 20 inch tarpaulin. The tarpaulin is designed to cover the junction where two shelters are placed end to end.
A-A-55266 - Tent: Lightweight Extreme Weather
This commercial item description covers two lightweight extreme weather tents in the following classes and sizes: Class 1-3 -Person Tent, All Season, Class 2-4-Person Tent, All Season.
DDD-D-690 - Dropcloth, Painter'S (Plastic And Cotton Duck)
K-P-146 - Tarpaulin, Cotton Duck, Fire, Water, Weather And Mildew Resistant (S/S By Mil-Dtl-32063)
This specification covers uncoated cotton duck tarpaulins (see 6.1).
K-P-146 - Tarpaulins, Cotton Duck, Fwwmr
MIL-B-3323 - Bar, 7-1/2 Inch, Double Eye For Tentage
MIL-B-44418 - Boot Wall, Fabric Assemblies, Standardized Integrated Command Post System (Sicps)
This specification covers five types of boot walls.
MIL-C-10632 - Covers And Cases, Textile, Army Equipment, General Specification For
MIL-C-1410 - Chain, Hook & Ring Assembly, Tent
This document covers one type of chain, hook, and supporting ring for M-1942 assembly tent.
MIL-C-1416 - Chains, And Plates, For Tents
MIL-C-16631 - Covers, Winch, Canvas
MIL-C-1825 - Cover, Cargo And Feed
MIL-C-1955 - Covers, Waterproof, Special Purpose
MIL-C-20189 - Cover Shade, Set No. 1, Bomber Airplane
MIL-C-20190 - Cover Shade, Set No. 2, Fighter Airplane
MIL-C-25952 - Cover, Aircraft Engine, Flexible, Waterproof
MIL-C-40071 - Cover, Protective, Azimuth Indicator
MIL-C-43350 - Cover, Protective, Anti Jamming Device, Nike Hercules Radar
MIL-C-43379 - Cover, Hawk Missile, Transport And Launcher
MIL-C-43412 - Cases, Tent Component Kit
MIL-C-44413 - Cover, Nuclear, Biological, And Chemical Protective (Nbc-Cp)
This specification covers a lightweight disposable (low cost) cover to protect exposed supplies and equipment from nuclear/chemical/biological attack and serves to ease the burden of decontamination throughout the Army.
MIL-DTL-10035 - Tent, Hexagonal, Lightweight, M-1950
This specification covers a pole-supported pyramidal tent with a fire-resistant treated liner.
MIL-DTL-12354 - Tent, Arctic, 10 Man
This document covers a pole-supported six-sided pyramidal tent fabricated of wind-resistant, cotton sateen cloth. A fire-resistant insulting liner and a protective cover for the tent and components are provided with the tent.
MIL-DTL-1608 - Hooks, Tent
This specification covers steel wire tent hooks.
MIL-DTL-1716 - Pole, Tent, Telescopic, Adjustable 5 Feet To 9 Feet, Magnesium
This specification covers one type and size of tubular magnesium telescopic tent pole. The pole is expandable from 5 feet to 9 feet in length according to the following adjustments: 5 feet - 0 inches, 5 feet - 8 inches, 6 feet - 2 inches, 7 feet - 0 inches, 8 feet - 3 inches, 8 feet - 6 inches, 9 feet - 0 inches
MIL-DTL-1734 - Slip, Tent Line
This specification covers two types of tent line slips.
MIL-DTL-3372 - Case, Tentage Repair Kit
This specification covers one type and size tentage repair kit case made of cotton duck and webbing.
MIL-DTL-43002 - Shield, Stovepipe, Tent, Nonmetallic
This specification covers requirements for a flexible, silicone rubber coated shield for a tent stovepipe opening.
MIL-DTL-43176 - Screen, Latrine, Fire, Water Weather And Mildew Resistant Treated
This specification covers requirements for a latrine screen made of Camouflage Green 483 polyester duck, that is fire, water, weather and mildew resistant treated. A cover is provided to protect the screen during storage and transportation.
MIL-DTL-43492 - Tent Sections, Frame Type, Expandable
This specification covers tent sections for an expandable, frame-supported tent of wind-resistant cotton sateen (see 6.1). Minimum dimensions of the expandable tent are as follows: Length 16 feet; width 16 feet; ridge height 8 feet, 6 inches; eave height 6 feet. Also included are a cover for the 16 foot by 16 foot tent, and arch and purlin carrying covers for the tent frame sections.
MIL-DTL-43695 - Frame Sections, Tent, Frame Type, Expandable
This specification covers the frame sections of the expandable frame type tent.
MIL-DTL-44285 - Doors, Double Bump Through
This specification covers two classes of double bump through door assemblies to be used on Temper tents and tactical rigid walled shelters (see 6.1).
MIL-DTL-44400 - Tent, Fabric Assemblies, Standardized Integrated Command Post System
This specification covers the fabric components of a frame-supported tent equipped, which can stand-alone or be completed with other tents or vehicles.
MIL-DTL-44404 - Tent, Command Post, Standardized Integrated Command Post System
This specification covers one complete Standardized Integrated Command Post System.
MIL-DTL-44427 - Tent, Soldier Crew
This specification covers two types of a frame supported soldier crew tent equipped with a frame, tent, pins, liner, fly and a gear net.
MIL-DTL-549 - Poles, Tent, Upright And Ridge
This document covers requirements for wooden tent poles, upright and ridge (see 6.1).
MIL-DTL-82288 - Tarpaulin: Laminated, Vinyl-Nylon Or Vinyl Polyester, Flexible
This specification covers the requirements for tarpaulins fabricated of flexible, vinyl-nylon or vinyl polyester, laminated cloth.
MIL-F-1437 - Fly, Fire, Water, Weather, And Mildew Resistant, Tent, Squad, O. D.
MIL-F-1461 - Frame Sections, Tent, Maintenance
This document covers the frame sections of the maintenance tent. The complete maintenance tent frame consists of one section No. 1 (bottom), one section No. 2 (middle), and one section No. 3 (top).
MIL-F-1611 - Fairlead, Tent Line, Magnesium
This specification covers nylon rope used for mountaineering operations.
MIL-F-18680 - Fly, Tent, Fire, Water, Weather, And Mildew Resistant
This specification covers requirements for one type and size of tent fly.
MIL-F-2066 - Flies, Fire, Water, Weather, And Mildew-Resistant, Tent, Wall, Large And Small, O. D.
MIL-F-40132 - Frame Sections, Tent, Maintenance, Medium, Light Metal
MIL-F-44251 - Frame Sections, Tent, Extendable, Modular, Personnel (Temper)
This specification covers the frame sections of an extendable frame type personnel modular tent with covers.
MIL-F-44425 - Frame Section, Tent, Five Soldier Crew
This specification covers a frame, equipped with a fabric frame bag, for the five soldier crew tent.
MIL-H-1411 - Hook, Tent, Assembly, Wall Section
This document covers a wall section tent hook assembly.
MIL-H-1679 - Hook, Tent; With Thimble, For Guy Line, Assembly Tent
This specification covers one type of assembly tent hook with thimble, for guy lines.
MIL-H-1884 - Hook, Trip, 3-Ton, M4A2 (For Submarine Mines)
MIL-L-1709 - Lines, Tent
This specification covers tent lines used in tentage and other items such as tarpaulins and covers.
MIL-L-3605 - Liner, Tent, Squad, With Screen
MIL-P-10404 - Paulins, Canvas, Fire, Water, Weather, And Mildew Resistant Treated, O.D., 12 Ft. X 17 Ft. And 20 Ft. X 40 Ft.
MIL-P-10959 - Paulins, Canvas, Fwwmrt, O.D., For Prefabricated Refrigerated Warehouses (Use K-P-146)
MIL-P-12130 - Packaging Of Fabrics For Tentage And Equipage
MIL-P-14174 - Platform (For Tent S-111) (/G)
MIL-P-1584 - Packing Requirements For Flaps, Tent, Insect-Proof, Od, Mrt.
MIL-P-1609 - Pins, Tent, With Metal Hook
MIL-P-1626 - Pole, Tubular, Sectional
MIL-P-16419 - Paulins (Ships And Boats) (Use K-P-146)
MIL-P-2383 - Pin, Tent, Wood
This document covers one type and three sizes of wood tent pins.
MIL-P-3340 - Paulin, Canvas, White (For Convertible Toboggan Sled).
MIL-P-40148 - Pole, Tent, Telescopic, Adjustable, Aluminum
This document covers aluminum telescopic tent poles of one type and two sizes. One pole is adjustable to lengths of 3 feet, 5 feet, and 7 feet; and the other pole is adjustable to lengths of 8 feet, 6 inches and 10 feet, 6 inches.
MIL-P-43413 - Pole, Tent, Light Metal, Special
This document covers special light metal tent poles.
MIL-P-44403 - Passageway, Complexing Kit
This specification covers the requirements for two types of passageways for the complexing kit.
MIL-P-500 - Plates, Tent, Peak And Ridge
This document covers six types of tent peak and ridge plates.
MIL-P-501 - Pin, Tent, Metal
This specification covers metal tent pins (see 6.1).
MIL-P-608 - Pole Section, Tent: Upright And Adapter, Tent Pole
This document covers one type of tent pole section and tent pole adapter.
MIL-Q-43400 - Quick Release, Fastener, Slide, Interlocking, For Air Inflated Shelters
MIL-R-1482 - Rings, Tent
MIL-R-43713 - Repair Kit, Tentage. For Air Supported, Polyester Cloth Tent
MIL-S-10895 - Sashes, Window, Tent
MIL-S-12853 - Shelter S-5/Ttq-1
MIL-S-1484 - Shield, Stovepipe, Tent (S/S By Mil-Dtl-43002)
This document covers two types of stovepipe tent shields.
MIL-S-1545 - Stay, Cover, Ventilator, Style 1, Steel Galvanized (Supersedes Jqd&276)
MIL-S-20056 - Screens, Bridge
MIL-S-2277 - Screen, Latrine, Fire, Water, Weather, And Mildew-Resistant Treated, O.D.
MIL-S-4049 - Shelter, Field Maintenance, Type A&1A (Supersedes 94&40425)
MIL-S-44325 - Shelter, Individual Multipurpose (Imps)
MIL-S-81220 - Shelter, Expeditionary Airfield Weapons Ready, Service
MIL-T-10009 - Tent, Kitchen, Flyproof, M-1948
This document covers one type of a rectangular, "A" type, square-end M-1948 flyproof kitchen tent with the back portion forming a stack higher than the rest of the tent. Dimensions of the tent are a follows: Length overall, 18 feet; width 12 feet; ridge height, 9 feet; side wall height, 6 feet; length of stack, 6 feet; stack ridge height, 12 feet; stack side wall height, 9 feet. A cover is provided during transport.
MIL-T-10069 - Tent, Maintenance Shelter, Fire, Water, Weather And Mildew Resistant, Olive Drab
This document covers a wall tent having the following dimensions: length 26 feet, 9-1/2 inches; width 18 feet, 2-1/4 inches; sidewall height 8-5/8 inches; ridge height 13 feet, 11-7/16 inches. A metal frame is required to support the tent. A cover is provided to protect the tent during transportation.
MIL-T-10168 - Tent, Frame Type, Insulated, Sectional, With Floor, 16 Feet Wide, M&1948, Complete
This document covers one type of general purpose insulated frame-type tent with floor. Identical parabolic ends with entrance doors provide for a detachable vestibule that may be used at either end. When erected, inside width at floor level is 16 feet, and inside length is expandable in multiples of 4 feet. One each electrical outlet and switch assembly for lighting is designed for use with a combination of sectional units completing an inclosure of 16 by 16 feet in size.
MIL-T-1108 - Tent, Fire, Water, Weather, And Mildew-Resistant, Wall, Large, O.D.
MIL-T-1109 - Tent, Fire, Water, Weather, And Mildew-Resistant, Wall, Small, O.D.
MIL-T-1110 - Tent, Assembly, M-1942
This specification covers the erection and sectional components of a circus-type tent fabricated from olive drab, fire, water, weather and mildew-resistant treated cotton cloth. The tent measures approximately 80 feet long by 40 feet wide, with a side wall height of 8 feet and a ridge height of 18 feet.
MIL-T-1111 - Tent, Command Post, M-1945, Fire, Water, Weather And Mildew Resistant, Olive Drab, Complete
This document covers one type of wall tent, having the following dimensions: width, 10 feet; length, 20 feet, 7 inches; ridge height, 9 feet; and side wall height, 5 feet, 10-1/2 inches. The tent is equipped with a liner, detachable sidewall screens, and a cover.
MIL-T-11697 - Tent, Fire, Water, Weather And Mildew-Resistant Treated, Command Post, M1945, O D.
MIL-T-12685 - Tent, Frame Type, Balloon Inflation, M-1957, Fwwmr, Olive Drab, Complete
MIL-T-12919 - Tent Liner, General Purpose, Medium
This document covers a tent liner for use with medium general purpose tents. Permanently attached screen side walls are provided with the liner (see 6.1). A cover is provided with each tent liner for protection during transport.
MIL-T-13056 - Tent, Hatch Type, Fire, Water, Weather And Mildew Resistant, Olive Drab
This specification covers one type of hatch tent for use over vessel hatches.
MIL-T-14038 - Tent, General Purpose, Large
This specification covers two types of rectangular, hip-roofed, pole supported, off-center ridge, general purpose tents.
MIL-T-14056 - Tent Liner, General Purpose, Large, Fire, Water And Mildew Resistant
This document covers one type of tent liner with cover for use with the large general purpose tent. Permanently attached screen side walls are provided with the tent liner.
MIL-T-14627 - Tent, Observing, Magnetic, Complete With Frame And Spreader.
MIL-T-1542 - Triangle, Tent, Steel
MIL-T-1569 - Tent, Sectional, Hospital
MIL-T-1712 - Tent, General Purpose, Medium
This specification covers two types of rectangular, hip-roofed pole-supported tents, equipped with a liner; tent pins; and poles, having the following dimensions; length 32 feet, 8 inches; width 16 feet; height (at ridge) 10 feet; height (of side wall) 5 feet, 6 inches; and height (of door) 6 feet. A cover is provided for protection during storage and transport.
MIL-T-1926 - Tent, Mountain, Two-Man, Complete With Pins And Poles
MIL-T-19324 - Tent, Pontoon Barge Type, Cloth, Cotton Duck
MIL-T-1956 - Tarpaulin, Waterproof, Special Purpose, 10 Feet Long By 8 Feet Wide
This specification covers the requirements for special purpose, waterproof tarpaulins.
MIL-T-3509 - Treatment, Fire, Water And Mildew Resistant For Tent Liner Fabrics.
MIL-T-40001 - Tent, Observing, Triangulation, Ground Type, Complete With Frame
MIL-T-40007 - Tent, Observing, Triangulation, Tower Type (For Use With Triangulation Tower).
MIL-T-40031 - Tent, Observing, Astronomic, Complete With Fly And Frame
MIL-T-41810 - Tent, General Purpose, Small
This document covers a six-sided pyramidal tent having the following dimensions. Length of side 8 feet 9 inches; eave height 5 feet; and height at peak 10 feet 6 inches. The tent is equipped with a liner, tent pins and poles and a cover. Both front and rear entrances are provided with a lacing flap arrangement to permit a vestibule attachment or the erection of two tents in tandem.
MIL-T-41811 - Tent And Sleeve, Console, Track Antenna Equipment, Complete With Frame
MIL-T-41812 - Tent Liner Sections, Frame-Type Maintenance, Medium
This document covers flame and mildew-resistant cotton sateen tent liner sections with covers. The liner consists of end sections and insulated intermediate sections. Each section is provided with a cover for protection during transport.
MIL-T-41813 - Tent Sections, Frame Type, Maintenance, Medium
This document covers tent sections with covers for one type of frame-supported raised hemicylindrical tent fabricated of fire, water, weather, and mildew-resistant (FWWMR) treated cotton duck. Each intermediate section is provided with a window and window screen, and each end section has a chain hoisted vehicle door, a personnel door, and a double heater duct. Covers are provided for protection of each section during transport.
MIL-T-41830 - Tent, Vehicle Maintenance, Complete With A-Frame
This document covers a cotton duck tent with a lightweight metal A-frame support assembly.
MIL-T-41832 - Tent, Nike Hercules, Air Supported
MIL-T-43163 - Tent, Frame&Type, Lightweight, Little John Conditioning Kit T&61&4
MIL-T-43182 - Tents, Missile System Equipment Console (Hawk)
This specification covers four different frame-supported tents for sheltering console, maintenance test shop, aft radar and front radar assemblies of the Hawk Missile System.
MIL-T-43189 - Tent, Frame-Type, Aviation Maintenance, Small
MIL-T-43211 - Tent, Radome, Air Support, Nike Hercules System, Single Wall, 27 Feet
MIL-T-43309 - Tarpaulin: Cotton Duck, For Wind Measuring Set
This specification covers a tarpaulin fabricated from cotton duck. The tarpaulin is provided with tie-down cords for securing to the trailer.
MIL-T-43333 - Tent Liner, General Purpose, Small And Arctic, 10 Man
This specification covers a tent liner for use with small general purpose and 10-man arctic tents. The tent liner is fabricated from natural color, fire resistant oxford cotton cloth.
MIL-T-43389 - Tarpaulin, Cotton Duck, Olive Drab No. 7, 20 Feet By 20 Inches (S/S By A-A-55235)
This specification covers the requirements for a cotton duck tarpaulin with tie ropes.
MIL-T-43416 - Tent, Sunshield, Theodolite
MIL-T-43512 - Tents, Missile System Equipment Console, (High-Power Illuminator Hawk)
This document covers two frame-supported console tents for use with the Hawk Missile System. A cover for each tent with its frame components is furnished to afford protection during storage and transport.
MIL-T-43764 - Tents, Cable Splicer
This specification covers frame supported cotton duck for sheltering cable splicers.
MIL-T-44222 - Tent Liner Sections; Insulated (Temper)
This specification covers insulated tent liner sections and covers for use with the tent, expandable, modular, personnel.
MIL-T-44243 - Tent Sections, Tent, Extendable, Modular, Personnel (Temper)
This specification covers the tent sections of an extendable, modular, personnel, frame supported tent.
MIL-T-4474 - Tarpaulins, Vehicle, General Specifications For
MIL-T-82120 - Tarpaulin, Duck, Cotton, Fire, Water, Weather And Mildew Resistant Treated, With Cartying Case
MIL-T-82152 - Tarpaulin: Duck, Cotton, Vinyl Resin Coated Both Sides, 14 Feet Long By 6 Feet Wide
This specification covers the requirements for one type and size coated tarpaulin.
MIL-T-83788 - Tent, Pyramidal, Survival, 3-4 Man, Sru-1/P
This specification covers a three to four man pole supported four sided pyramidal tent with a tunnel type entrance.
MIL-U-11224 - Umbrella, Surveyor'S (Six Rib)
MIL-U-5137 - Shelter, Aircraft Maintenance, Type B-4
MIL-W-12367 - Windbreak, Flexible Material
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business