INCH-POUND
MIL-DTL-43695C
23 June, 2000
---------------------
SUPERSEDING
MIL-F-43695B
15 September, 1987
DETAILED SPECIFICATION
FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1.
SCOPE
1.1 Scope. This specification covers the frame sections of the expandable frame type
tent.
*1.2 Classification. The frames are provided in the following sections (see 6.2)
End section
Expandable section
APPLICABLE DOCUMENTS
2.
*2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions, clarifications) and any
pertinent data which may be of use in improving this document should be addressed to:
Defense Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-CNR,
700 Robbins Ave., Philadelphia, PA 19111-5096 by using the Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A
FSC 8340
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business