MIL-DTL-12354G
4.4.3 End item visual examination.
*4.4.3.1 Tent with liner and cover. The end item shall be in an erected position so that both the inside and
outside of the tent can be examined, along with its cover, for defects listed in table II. The lot size shall be
expressed in units of tents with covers. The sample unit shall be one tent with its cover. The inspection level shall
be I.
*4.4.3.2 Cover, only. The end item shall be in an erected position so that both the inside and outside of the
cover for the applicable defects listed in table II. The lot size shall be expressed in units of covers. The sample
unit shall be one cover. The inspection level shall be I.
TABLE II. End item visual defects
Classification
Examine
Defect
Major Minor
A
B
Fabric
Cut, tear, or hole (including exposed
drill hole) greater than 1/8 inch in
length or diameter:
- on tent
101
- on cover or snow cloth
201
Cut , tear, or hole (including exposed
drill hole) 1/8 inch or less in length
or diameter:
- more than 20 holes:
-on tent
102
- on cover or snow cloth
202
- more than 10 but not more than 20:
- on tent
203
- on cover or snow cloth
301
- more than 5 but not more than 10:
- on tent
302
Broken or missing yarns; multiple
floats clearly visible at normal
inspection distance (approximately
3 feet)
204
Netting
Hole, cut or tear:
- more than 2 inches in length
103
- more than ¼ inch but not
- more than 2 inches in length
205
- ¼ inch in diameter
303
Webbing and tape
Edge frayed or scalloped
304
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business